Switched Pots
Switched guitar pots — push-pull and push-push DPDT — for coil-tap, phase and series mods without major rewiring.
PTSW07 — Bourns Switched Pot (18 mm Collar, Push-Pull)
Bourns ultimate-quality switched pot with 18 mm solid-brass collar and push-pull DPDT switch.
9.5 mm CTS-compatible thread, 18 mm long-collar — fits US Les Paul tops. 2 nuts supplied for height adjustment.
£7.95 inc. VAT · Bourns push-pull pot — 500k Log
- Brand
- Bourns
- Switch
- Push-Pull DPDT
- Resistance
- 500k Ohm
- Taper
- Audio (Log)
- Thread
- 9.5 mm × 18 mm (CTS-compatible, US-spec long collar)
- Knob Fit
- Standard 6 mm split-shaft / 18-spline
PTSW01 — Switched Pot (Push-Pull)
Excellent-quality switched pot with push-pull DPDT.
10 mm collar — body or scratchplate mounting. 250k or 500k Ohm, Log or Linear taper.
From £4.75 inc. VAT · Switched pot — choose Ohm value, taper
- Switch
- Push-Pull DPDT
- Collar
- 10 mm
- Resistance
- 250k or 500k Ohm
- Taper
- Log or Linear
- Common Uses
- Coil tap · phase reverse · series/parallel
PTSW03 — Switched Pot (Push-Push)
Hard-to-find push-push switched pot.
Slicker than push-pull — especially live. One push out, second push toggles in. 10 mm collar, 500k Ohm.
From £6.45 inc. VAT · Switched pot — choose taper
- Switch
- Push-Push DPDT
- Action
- First push: out · second push: in
- Collar
- 10 mm
- Resistance
- 500k Ohm
- Taper
- Log or Linear
CPTN06 — Orange Drop Tone Capacitors
Orange Drop capacitors — widely accepted as the best caps for guitar tone circuits.
Four classic values: .047 µF (single coils), .033 µF (general-purpose), .022 µF (humbuckers), and .1 µF (active pickups).
£1.65 inc. VAT · Single Orange Drop capacitor
- Type
- Orange Drop tone cap
- Values
- .022 µF · .033 µF · .047 µF · .1 µF
- Best Match
- HB → .022 · SC → .047 · Active → .1
WRVCCW — Vintage Cloth-Covered Wire
22 AWG waxed cloth-covered wire — push back the cloth to reveal pre-tinned conductors.
Vintage look, super-easy to work with. Two ~2 ft lengths — cream and black.
£4.95 inc. VAT · 2 × ~2 ft of 22 AWG cloth-covered wire (cream + black)
- Gauge
- 22 AWG
- Insulation
- Waxed cotton cloth (no stripping needed)
- Length
- 2 × ~2 ft (cream + black)
WRVBW — Vintage Cloth Braided Wire
22 AWG braided wire with waxed-cloth inner insulation.
One 5 ft length — enough for a Les Paul build including three runs to the selector switch. Push back the braid to reveal pre-tinned conductors.
£9.95 inc. VAT · 5 ft of 22 AWG vintage braided wire
- Gauge
- 22 AWG
- Insulation
- Waxed cotton cloth (inner) + woven outer braid
- Length
- 1 × 5 ft (single colour)
- Use
- Vintage-style internal wiring & earthing
WRHUW — Hook-Up Wire (Yellow + Black)
22 AWG hook-up wire with heavy-duty insulation.
Two ~1 m lengths — yellow and black — perfect for internal guitar wiring of pots, jacks and switches.
£3.95 inc. VAT · 2 × ~1 m of 22 AWG wire (yellow + black)
- Gauge
- 22 AWG
- Insulation
- Heavy-duty PVC
- Length
- 2 × ~1 m (yellow + black)
CRTC01 — Treble Compensation Network
Pre-built capacitor + resistor "treble bleed" network.
Wires across the volume pot's input and wiper to keep top-end clarity as you back off the volume — no more dull, muddy clean tones at low settings.
£0.50 inc. VAT · Single treble-bleed network
- Type
- Cap + resistor in parallel
- Function
- Treble-bleed (preserves brightness at low volume)
- Wiring
- Across volume pot — input ↔ wiper
PTNT01 — Potentiometer Nuts
Replacement chrome pot nuts — single nuts.
Suitable for use with PT0001, PT0002 and PTSW01 / PTSW03 pots. (All our pots are supplied with their own nuts — you only need these as spares or replacements.)
£0.10 inc. VAT · Single chrome pot nut
- Finish
- Chrome
- Compatibility
- PT0001 · PT0002 · PTSW01 · PTSW03
