Tremolo Parts
Replacement parts for Strat-style fulcrum tremolos — arms, tips, springs, spring claw, claw screws, bridge pins and mounting posts.
BRTA12 — Tremolo Arm (Type 1 — threaded, with grip)
Threaded tremolo arm with rubber grip — 6 mm thread.
Easier to grab and use than a bare metal arm. Choose your tip colour at checkout.
£4.00 inc. VAT · Threaded chrome arm with rubber grip and tip
- Type
- Threaded with rubber grip
- Thread
- 6 mm
- Arm Finish
- Chrome
- Tip
- White or Black
BRTA13 — Tremolo Arm (Type 2 — threaded, no grip)
Threaded tremolo arm — no grip. 6 mm thread.
Plain chrome bare-metal arm — fits any tremolo with a 6 mm threaded socket.
£4.00 inc. VAT · Threaded chrome arm (no grip, no tip)
- Type
- Threaded — no grip
- Thread
- 6 mm
- Finish
- Chrome
BRTA14 — Tremolo Arm (Type 3 — push-in, no grip)
Push-in (threadless) tremolo arm — no grip.
5.5 mm diameter — for tremolos that take a push-fit (rather than threaded) arm.
£4.00 inc. VAT · Push-in chrome arm (no grip, no tip)
- Type
- Push-in (threadless) — no grip
- Diameter
- 5.5 mm
- Finish
- Chrome
BRTT01 — Tremolo Arm Tip
ABS replacement tips for tremolo arms.
Tip: to change your tip, place it in boiling water for 10–15 seconds, then pull it off / push the new one on with a soft cloth.
£0.75 inc. VAT · Single ABS replacement tip
- Material
- ABS
- Colour
- Black or White
- Fitting
- Heat-fit — boil to soften, then pull/push
BRSC20 — Tremolo Spring Claw
Solid replacement spring claw.
Anchors the rear ends of the tremolo springs in the body cavity. A direct replacement for standard Strat-style claws.
£1.00 inc. VAT · Single spring claw
- Type
- Strat-style spring claw
- Includes
- Claw only (screws sold separately as BRCS21)
BRSP19 — Tremolo Springs (Set of 4)
Set of 4 replacement tremolo springs.
Standard size — fits most Strat-style fulcrum tremolos and floating bridges.
£3.50 inc. VAT · Set of 4 springs
- Quantity
- Set of 4 springs
- Fits
- Strat-style fulcrum tremolos and most floating bridges
BRCS21 — Tremolo Claw Screws (Pair)
Pair of replacement tremolo claw screws.
Mount the BRSC20 spring claw into the body cavity. Sold as a pair.
£0.50 inc. VAT · Pair of claw screws
- Quantity
- Pair (2 screws)
- Pairs With
- BRSC20 spring claw
BRBP09 — Bridge Pins (Pair)
Pair of bridge pins for fulcrum-design tremolo bridges.
Provides the pivot point for the bridge plate to rock against — replace if worn or to fit a new bridge.
£3.50 inc. VAT · Pair of fulcrum bridge pins
- Quantity
- Pair (2 pins)
- For
- Fulcrum-design tremolo bridges
BRMP10 — Tremolo Mounting Posts (Type 1)
Complete tremolo mounting-post assembly.
Distance between post centres: 68 mm. Supplied as the complete assembly shown in the photograph.
£5.00 inc. VAT · Complete tremolo mounting-post assembly
- Type
- Tremolo mounting posts (Type 1)
- Post-Centre Spacing
- 68 mm
- Includes
- Complete assembly as shown