spst04_strat_scratchplate_bwb_200.gif spst06-bwb-200_v02.gif
SPST02: STRAT SCRATCHPLATE - HSS
SPST03: STRAT SCRATCHPLATE - HH
Cut for 1 x humbucker & 2 x single-coil (HSS) pickups.
Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.
See bottom of page for screws / knobs etc.

Click on any of the pictures on the left for an expanded view showing the critical bridge/humbucker dimensions.

Available in 3 colour options:-
BWB 3-Ply
WBW 3-Ply
White Pearl
Cut for 2 x humbucker (HH) pickups - covered or open-coil.
Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.

Tip: "3-Ply" and "Black/White/Black" refer to the material being a sandwich of 3 layers. In this case black, then a middle layer of white, and finally a third layer of black.
When the scratchplate is cut with the usual chamfered egde, this gives the distinctive thin white line running around the outside.

Click on the small picture to the right for a visual example.
So, if you're looking for a black scratchplate with a thin white line around the edge, select "Black/White/Black" Sorry to go on, but these terms cause no end of confusion!
SPST04: STRAT SCRATCHPLATE - SSS - LEFTY
LEFT HANDED scratchplates, cut for 3 x single-coil (SSS) pickups. Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.

US Standard Profile: These scratchplates comply with the specification of US Standard Strats for which they are a "drop-in" replacement. They can be used on non-US made instruments (e.g. Squiers) but will be a less precise replacement.
SPST06: STRAT SCRATCHPLATE - HSH
Cut for 2 x humbuckers (HSH) and one single-coil pickups.

Precision, 11 hole, 3-Ply pickguards with shielding for control area and pickups bonded to the reverse surface.

Routed for 1 Vol + 2 Tone controls. Supplied in US PROFILE only.
spst02_bwb_v01-200.gif spst02_wbw_v01-98.gif spst02_white_pearl_v01-98.gif spst03_hh_bwb_200_1v2t.gif guitar_parts_uk022040.gif
3-Ply
Black/White/Black
White/Black/White
3-Ply
3-Ply
Black/White/Black
3-Ply
Black/White/Black
SCRW01: SCRATCHPLATE SCREWS
Quality pickguard screws in a choice of 3 finishes.

Sold in packs of 11, 25 or 50
White Pearl:
IN STOCK
WBW:
IN STOCK
BWB:
IN STOCK
Stock Status
GUITAR PARTS UK - PICKUPS, PARTS & ACCESSORIES
Total:
Go
Fender, Stratocaster, Telecaster are registered trademarks of Fender Music Corporation. Gibson, and Les Paul are registered trademarks of Gibson Music Corporation. Axetec Ltd is not affiliated with these manufacturers in any way.
Guitar parts uk Pickups bridges knobs pots tuners machineheads fender gibson les paul stratocaster telecaster lace seymour duncan 
epiphone new and used online epiphone parts fender parts gibson parts  gotoh schaller  bridges luthier parts stratocaster telecaster 
les paul
HIGH QUALITY GUITAR SPARES, PARTS & PICKUPS AT THE BEST PRICES
Items:
guitar_parts_uk001011.gif sidemenubutton14-sf01.gif sidemenubutton14-st01.gif sidemenubutton14-np01.gif guitar_parts_uk009011.gif sidemenubutton14-sn01.gif guitar_parts_uk009009.gif guitar_parts_uk009007.gif sidemenubutton14-jp01.gif sidemenubutton14-kb01.gif sidemenuheader-elec-01.gif sidemenuheader-bridges-01.gif sidemenuheader-tuners-01.gif sidemenuheader-pickups-01.gif sidemenuheader-news-01.gif sidemenuheader-cont-01.gif sidemenuheader-about-01.gif sidemenuheader-newprod-01.gif sidemenuheader-acc-01.gif sidemenuheader-map-01.gif sidemenuheader-order-01.gif sidemenuheader-links-01.gif sidemenuheader-gall-01.gif sidemenuheader-feedback-01.gif sidemenuheader-hware-02.gif sidemenubutton14-sp02.gif guitar_parts_uk017057.gif scrw01_dimensions_95.gif
SPST21: ANODISED ALUMINIUM SCRATCHPLATE - SSS
Cut for 3 x single-coil (SSS) pickups. Available in US Profile and Gold, Silver or Black finishes.

These anodised high-grade aluminium Strat scratchplates are utterly superb. The precision cutting has to be seen to be believed! Click on the pictures to the left for an expended view.

8 hole, solid aluminium pickguards that are superb for shielding and reduced noise.

Note: The 8 holes are in the same places as a US standard 11-hole scratchplate (the material really only needs 8 holes because of its increased rigidity. So they'll replace a standard US scratchplate perfectly with no new holes to drill.

See bottom of page for screws.
spst21_gold_v01-200.gif spst21_black_v01-200.gif spst21_gold_black_v01-200.gif
SPST01: STRAT SCRATCHPLATE - SSS - 1-PLY & 3-PLY
Cut for 3 x single-coil (SSS) pickups.

Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.

US Standard Profile: These scratchplates comply with the specification of US Standard Strats for which they are a "drop-in" replacement. They can be used on non-US made instruments (e.g. Squiers) but will be a less precise replacement.

Available in 4 colour options:-
Black/White/Black (BWB)
White/Black/White (WBW)
Tortoishell
Black (1-Ply)

See bottom of page for screws.
spst01-wbw-v4-200.gif
BWB:
IN STOCK
Stock Status
WBW:
IN STOCK
spst01-bwb-v4-200.gif
Tip:"1-Ply" refers to a plain black scratchplate with no white stripe around the outer.
"3-Ply" and "Black/White/Black" refer to the material being a sandwich of 3 layers. In this case black, then a middle layer of white, and finally a third layer of black.
When the scratchplate is cut with the usual chamfered egde, this gives the distinctive thin white line running around the outside.
Click on the small picture to the right for a visual example.
So, if you're looking for a black scratchplate with a thin white line around the edge, select "Black/White/Black"

Sorry to go on, but these terms cause no end of confusion!
1-Ply Black:
IN STOCK
Tortoishell:
IN STOCK
SPST01: STRAT SCRATCHPLATE - SSS - PEARLOID
Cut for 3 x single-coil (SSS) pickups.

Precision, 11 hole, 3-Ply pickguards with shielding for control area bonded to the reverse surface.

US Standard Profile: These scratchplates comply with the specification of US Standard Strats for which they are a "drop-in" replacement. They can be used on non-US made instruments (e.g. Squiers) but will be a less precise replacement.

Available in 4 colour options:-
White Pearl
Grey Pearl
Red Pearl
Blue Pearl


See bottom of page for screws.
spst01-grey_pearl-v4-200.gif
White:
IN STOCK
Stock Status
spst01-white_pearl-v4-200.gif
Red:
IN STOCK
Blue:
IN STOCK
spst01-red_pearl-v4-98.gif spst01-blue_pearl-v4-98.gif spst01-tortoise-v4-98.gif
BWB:
IN STOCK
Stock Status
From 12.00 inc' VAT
12.00 inc' VAT
12.00 inc' VAT
12.95 inc' VAT
>
From 19.95 inc' VAT
Quantity Required: 
12.00 inc' VAT
14.50 inc' VAT
spst21_silver_v01_200.gif
SPECIAL
OFFER!
5
SPECIAL
OFFER!
5
SPECIAL
OFFER!
5
Free Shipping to UK mainland & N.I.
available on all orders over 12.50
Secure on-line ordering. We accept:
FREE SHIPPING
Orders placed before 11.00am Monday to Friday
(exc' Bank Holidays) are usually despatched same day.
NEXT DAY DELIVERY
Company number: 7156827
Copyright 2007-2018 Axetec Ltd
All Rights Reserved.
VAT number: 942297015
All Prices Include VAT